RMC HEATGUARD SOLAR is a High Flow Tempering Valve that mixes hot water with cold water to deliver tempered water at a constant temperature throughout an entire house, building or system. Suitable for high flow, large capacity applications and for low pressure environments. These tempering valves have been specially engineered to withstand the extreme thermal demands of solar heating applications. They are also suited for low pressure, high flow environments such as gravity fed and tank suupplied solar water heater installations.
• Cold water supply temperature: 5°C - 30°C
• Hot water supply temperature: 60°C - 99°C
• Optimum outlet temperature range: 40°C - 50°C
• Set temperature: Must be commissioned on site to achieve desired outlet temperature
• Accuracy of outlet temperature: ±3° C – tested to AS4032.2 between 40°C and 50°C
• Minimum temperature differential: (Between hot supply and outlet temperature) 15°C
• Supply pressure, static: 1600 kPa maximum
• Minimum flow rate: 4 litres/min.
• Only available in 20mm configuration
• Fittings Supplied Male BSP Thread
The Low Pressure, high flow tempering valve is for use in solar hot water distribution systems. fitting the valve at the hot water source ensures the delivery of constant temperture hot water throughout the system.
DO NOT USE on steam supplied systems.
These tempering valves have been specially engineered to withstand the extreme thermal demands of solar heating applications. They are also suited for low pressure, high flow environments such as gravity fed and tank suupplied solar water heater installations.
• High thermal endurance
Will endure the extreme temperatures present in solar installations
• High Flow design
Designed especially for use on high flow, large capacity systems with reduced head loss
• Union connections
Valve easy to install and easy to remove for servicing of strainers
• Performance
More accurate control of outlet temperature – safer installations
• Strainers upstream of check valves
Protects valve and check valves from impurities in the water supply
• Tamper-proof adjustment
Special adjuster key eliminates chances of accidental adjustment
• Dezincification resistant
Meets Australian Standard for potable water supply
• Individually tested and calibrated
Every valve is tested to ensure higher quality and performance
HEATGUARD SOLAR is only available in 20mm size configuration:-
MIX11511
