Home /
BSP Threaded Screwed Brassware

BSP Threaded Screwed Brassware

More Views

BSP threaded fittings for water-tight joints.

One Compression End: The screwed end is given first, followed by the compression end.
Three Compression Ends: The straight line ends are given first, followed by the branch end.
Two Compression Ends: The larger end is given first
Male or Female Screwed Ends: The larger end is given first

AUSTRALIAN STANDARD - AS 3688/1994 & 1990

	10092 Nylon Olive 15mm (1/2”) Quantity	US$0.20 Buy 1000 for US$0.10 each and save 50%
	4204 Brass Tees 20mm (3/4”) Quantity	US$6.20 Buy 10 for US$4.90 each and save 21%
	5502 Elbows Male 20mm (3/4”) MI X 15mm (1/2”) Compression Quantity	US$4.30 Buy 5 for US$3.47 each and save 20%
	3203 Nipples (Hexagon) 15mm (1/2”) Both Ends Quantity	US$1.50 Buy 10 for US$1.19 each and save 21%
	10093 Nylon Olive 20mm (3/4”) Quantity	US$0.20 Buy 1000 for US$0.10 each and save 50%
	10091 Brass Kinco Nut 20mm (3/4”) Quantity	US$0.20 Buy 100 for US$0.13 each and save 35%
	2503 Screwed Brass Elbows 15mm (1/2”) MI X 15mm (1/2”) FI Quantity	US$3.10 Buy 10 for US$2.48 each and save 20%
	3204 Nipples (Hexagon) 20mm (3/4”) Both Ends Quantity	US$1.80 Buy 5 for US$1.44 each and save 20%
	10090R Brass Kinco Nut 15mm (1/2”) Quantity	US$0.90 Buy 10 for US$0.70 each and save 23%
	4203 Brass Tees 15mm (1/2”) Quantity	US$3.70 Buy 10 for US$3.00 each and save 19%
	3308 Reducing Nipples (Hexagon) 20mm (3/4”) x 15mm (1/2”) Quantity	US$2.20 Buy 5 for US$1.80 each and save 19%

Fittings for leak-free connections. For fittings with two unequal ends, the larger end is always given first. For fittings having three ends, the two ends in the same straight line are given first (the larger end first) followed by the remaining end.

DIMENSIONS:
Imperial    Nominal Metric    Actual metric
½”        15mm            12.70mm
¾”        20mm            19.04mm

MATERIALS:
Dezincification resistant brass alloy

• Plumbing • Compressed Air • Water and Gas Utilities

Used to provide water-tight joints in light gauge copper and stainless steel tubing as used in hot and cold water lines, compressed air systems, oil based liquid lines and sprinkler systems.

• Increased wall thickness allow fittings to withstand higher operating pressures • Longer threads with large interlocking surfaces for leak-free connections • Tapered male threads for deep positive locking and reduced chance of splitting female connections • Wide nuts allow spanners greater purchase area to enable non-slip tightening • Manufactured to Australian Standard AS3668 • Approved by all Australian Water Authorities • Manufactured using DR brass • Standard BSP threads in order to ensure compatibility throughout the plumbing industry

Available in 15mm (1/2”) or 20mm (¾”) configurations Hex nipples, Elbows, Tees, Nuts and Olives