Home /
NCLX Temperature and Pressure Relief Valve USA Standard

NCLX Temperature and Pressure Relief Valve USA Standard

NCLX Temperature and Pressure Relief valves are installed to protect water heaters or water storage tanks from excessive temperature or pressure.

Manufacturer: CASH ACME

AMERICAN STANDARD - CERTIFIED TO ANSI Z21.22 and CSA 4.4, CAPACITY CERTIFIED ASME BOILER CODE SECTION IV.

Connections:

Threaded (NPT) . . . . . . . . . . . . . Male inlet and female outlet

	NCLX-5 125 Temperature and Pressure Relief Valve 3/4" NPT 125 psi Quantity	$16.40 Buy 50 for $15.30 each and save 7%
	NCLX-5 150 Temperature and Pressure Relief Valve 3/4" NPT 150 psi Quantity	$16.40 Buy 50 for $15.30 each and save 7%

NCLX Domestic Temperature and Pressure Relief Valves are designed for the protection of hot water heaters and storage tanks. These meet all relevant standards and are ideal for most domestic water heater applications.

Available set pressures . . . . . . . 125 and 150 psi
Maximum temperature . . . . . . . . 210°F
Service . . . . . . . . . . . . . . . . . . . . Hot water

DIMENSIONS
Type Size A B C D E
NCLX-5 3/4" 1-1/4" 1-5/8" 4-7/8" 1-3/16" 3-3/32"

Materials:
Body . . . . . . . . . . . . . . . . . . . . . . Bronze
Internal Parts . . . . . . . . . . . . . . . Brass and Stainless Steel
Seat Disc . . . . . . . . . . . . . . . . . . Silicone
Pressure Spring . . . . . . . . . . . . . Stainless Steel
Diaphragm (FCLX) . . . . . . . . . . . EP

The Temperature and Pressure Relief Valve is completely automatic and will reseat after either temperature or pressure relief. These valves also incorporate an innovative 'white coat' thermal element coating which is an inert covering that provides many years of dependable safety protection.

•    Incorporates an inert thermal element coating: Provides effective isolation from mineral deposits (liming) and galvanic corrosion.
•    Completely automatic and reseats after temperature or pressure relief: Ideal for all domestic water heater applications.
•    Listed by CSA and ASME: Inspector friendly, peace of mind!
•    Every valve is tested for performance prior to shipping: Specify and install with confidence!

•    Available set pressures . . . . . . . 125 and 150 psi
•    Available sizes ...............................1/2" & 3/4"
•    For Temperature and Pressure Relief Valves of Austraian Standard go to Pressure and Temperature Relief Valves AU
•    UK Standard go to Pressure and Temperature Relief Valves UK